Long Exposure and Night Photography on Film
Film is wonderful at night. Streetlights glow, water turns to mist, and stars draw arcs across the sky, all on a single frame that took seconds, minutes or hours to expose. Long exposures on film need a tripod, a way to hold the shutter open, and one correction digital photographers never think about: reciprocity failure. This guide covers all three, with starting exposures for common night scenes.
What you need
- A sturdy tripod. Any movement during the exposure shows as blur.
- A camera with a B (bulb) or T (time) setting. Bulb holds the shutter open while the release is pressed; T opens on one press and closes on the next. Most manual film cameras have one or both.
- A locking cable release. It lets you hold bulb without touching the camera.
- A watch or timer. Your phone works, as long as its screen isn't in the frame.
- A camera that doesn't drain its battery on bulb. Many electronic cameras hold the shutter open with power, so long exposures empty the battery. Mechanical cameras use none.
Starting exposures for night scenes
Meters struggle at night, and many camera meters stop working below a few seconds. These starting points are for ISO 100 film at f/8, before reciprocity correction. Bracket generously.
| Scene | Metered time at ISO 100, f/8 |
|---|---|
| Brightly lit city street, shop windows | 1/8 to 1/2 second |
| Floodlit buildings, fountains | 2 to 8 seconds |
| City skyline at dusk (blue hour) | 1 to 8 seconds, longer as the sky darkens |
| Suburban streets under streetlights | 4 to 15 seconds |
| Landscape under a full moon | 8 to 15 minutes (about 2 to 4 minutes at f/4) |
| Star trails | As long as you like; 15 minutes to several hours at f/4 to f/5.6 |
These are approximate and vary a lot with the scene. A handheld meter or a phone meter app that reads low light gives a better starting number, which you then correct for reciprocity.
Correcting for reciprocity failure
At exposures longer than about a second, most films become less sensitive, so a metered 30 seconds might need two minutes or more. This is reciprocity failure, and how much it matters depends heavily on the film:
- Very good reciprocity: Fujifilm Acros II needs no correction up to 120 seconds by Fujifilm's data, which makes it a favorite for night work. T-Max and Delta films also behave well.
- Moderate: most modern color negative films, including Portra, need a little extra beyond about a second.
- Significant: traditional black and white films such as Tri-X and HP5 Plus need large corrections; a metered minute can become several.
Use the manufacturer's table or formula for your film, which our reciprocity guide explains. With color film, long exposures also shift color, often toward green or magenta, which is easier to correct in a scan than in the darkroom.
Composing and focusing in the dark
- Compose before the light fades, then wait.
- Focus on a bright light at the right distance, or use the lens's distance scale. For stars, set infinity on the scale; some lenses focus slightly past the mark.
- Use the hyperfocal distance when near and far detail both matter.
- Stop down to f/8 or f/11 for city scenes: streetlights render as star shapes, and depth of field covers the frame.
Blue hour
The best night city photographs are usually made at dusk, 20 to 40 minutes after sunset, when the sky is a deep blue that still holds detail and the artificial lights are on. Exposures are short enough that reciprocity is small, and the sky separates buildings from the background. On tungsten-balanced film such as CineStill 800T, the sky turns an even deeper blue while streetlights render close to neutral.
Star trails
Point the camera at the sky on a moonless night away from city light, open the shutter on bulb or T, and leave it. The earth's rotation draws each star into an arc of 15 degrees per hour; point toward the celestial pole (Polaris in the Northern Hemisphere) and the arcs circle it. Use a wide lens at f/4 to f/5.6 with ISO 100 to 400 film for an hour or more. Very long exposures build up sky fog from any light pollution, so test with a shorter one first.
Moving water, clouds and light trails
In daylight, long exposures need a neutral density filter. A 10-stop ND filter turns 1/125 into about 8 seconds, enough to smooth water and streak clouds. Remember to add reciprocity correction to the filtered time. At night, car headlights and taillights draw lines through the frame on exposures of 10 to 30 seconds; open the shutter as the traffic arrives.
Light leaks on long exposures
A tiny leak that never shows at 1/125 can fog a frame over ten minutes, so check light seals before a night session. On SLRs that meter during the exposure, close the eyepiece blind or cover the eyepiece: light entering it can fool the meter into ending an automatic exposure early. See common film problems.
Developing night negatives
Night scenes are high in contrast: tiny, intense lights against deep shadow. With black and white film, consider reducing development by 10 to 20 percent so highlights don't block up, or use a compensating method such as semi-stand development. Color negative film handles the range well with normal processing.
Terms in this guide
More on exposure and metering
All the guides are on the Learn Film Photography page, and every term is in the glossary. Shot something on film? Share it in the gallery.